Category 'Compositing'

Compositing gives photographers the magical power to change the weather. Most people crave a sunny sky but for conceptual and landscape photographers the more colour and cloud in the sky the better. We go to so much effort to make a scene beautiful and interesting and are often let down by those bright, washed out skies. This is why photographers like to be up at the crack of dawn capturing sunrises. It’s also why photographers who don’t use Photoshop buy expensive filters, why photographers who do use Photoshop take two exposures—one exposing for the land and one exposing for the sky—and blends them together. And then there’s the third camp who are perfectly comfortable messing with reality and swap their skies for entirely different ones. This is the sleeper-inners method so stick with me to learn how to replace a sky if you’re not a morning person. [gallery size="medium" link="none" ids="1925,1926,1927"]   If all horizons were straight and not covered by mountains and trees then replacing a sky would be a breeze but things just aren’t that simple. Because of this there’s more than one way to replace a sky in Photoshop and it can take some experimenting to find the one that works best for your image.

Choosing your new sky

In last week’s lesson I talked about collecting photos of clouds and skies for the purpose of swapping them into new scenes. So when looking for a sky image there’s a few things to keep in mind:
  • You’ll want to find a sky lit the same way as your foreground. If your subject is side lit from the left you should look for skies where the sun is also on the left. You can always flip your sky image to get the lighting in the right spot.
  • To save on colour work it also helps if your sky is a similar colour to the foreground. A dark overcast sky probably won’t work with a sunrise lit landscape.
  • If you want your image to look realistic try and line up the horizon lines in both images or the sky may look unnatural. Skies look different near the horizon than they do in the middle of the sky. If you’re a conceptual photographer you have some leeway with this because you’re building an ‘otherworldy’ scene anyway.
  • To save on work make sure your sky image is free from distractions like light poles or power lines, though you can always clone these out if there’s a sky you particularly like. Or you can hide them by dragging your sky layer lower behind your subject image.
  • Keep in mind that skies are pretty flexible and can usually be stretched and resized a fair bit before they start to look weird.
[caption id="attachment_1928" align="aligncenter" width="300"]In desperate need of a new sky In desperate need of a new sky[/caption]

How to replace a sky in Photoshop

[caption id="attachment_1933" align="alignright" width="300"]Reduce opacity of sky layer to see where to move it to Reduce opacity of sky layer to see where to move it to[/caption] I personally like to experiment with a few sky options rather than limiting myself to one. So in Lightroom highlight all your chosen skies and go to Photo->Edit In->Open as Layers in Photoshop and then one by one, use the move tool (V) to drag each sky up to the document tab of the foreground image and then down onto the canvas. Lower the opacity of your sky image using the Opacity setting in your layers palette and move your sky into place. Edit->Transform->Flip Horizontal if you think the sky will work better flipped. If you want to scale or stretch your sky image press Ctrl/Cmd T and drag the corners of the bounding box to resize. Hold down shift if you want to resize with the same proportions. In no particular order here’s all the different methods I know of for adding a new sky.

Method one for replacing a sky – selection tools: Color Range

[caption id="attachment_1929" align="alignright" width="300"]Color range selection Color range selection[/caption] This method works best if your original sky is primarily one flat colour. Drag your sky layer below your subject layer. With the subject layer highlighted go to Select->Color Range. I prefer to use ‘Sampled Colors’ and then use the eyedropper to sample the original sky’s colour but you can also try choosing ‘Blues’ in the dropdown menu. In your preview box you can see what will be selected (areas of white) and what won’t be selected (areas of black). Play around with your fuzziness slider to refine the selection and use the + and – eyedropper tools to add and remove from your selection. Click OK when you’re happy. If the selection has missed any bits you can choose the lasso tool and holding down Shift draw around any bits of the sky you want to get rid of. Press the add layer mask button which might apply the new sky to your foreground. Obviously this is not what you want! So press Ctrl/Cmd i to swap your mask’s colours. And there you have it—a new sky! [gallery link="none" size="medium" ids="1931,1932,1930"]  

Method two for replacing a sky – selection tools: Magic Wand

I find the magic wand tool a little more flexible than Color Range as you can use it on skies that vary in colour. Grab your magic wand tool (W) and click on your original sky. Play around with the tolerance settings in your options bar if it’s not selecting enough or too much. Shift click any others areas you wish to add to the selection and Alt/Opt click any you wish to remove. Your aim here is to make sure the horizon line is properly selected. If the magic wand tool has also selected some of your foreground you can activate the lasso tool (l), hold down Alt/Opt and just draw around an areas you don’t want included in the selection to remove them. Then, as above, hit your add layer mask button and invert the selection if necessary. [gallery size="medium" ids="1935,1937,1934"]   If you find the magic wand tool has given you jagged edges you can click on your mask and go to Select->Refine Edge. Play around with the sliders, particularly ‘Smooth’ and ‘Feather’ until the edges look better. With these first two methods if you find you’re getting haloing around leaves on trees I recommend watching Glyn Dewis’s video for advanced tips on how to fix this.

Method three for replacing a sky – Blend If

'Blend If' is a cool little feature that's useful for many things. It doesn’t really matter what order your layers are in but for this example I’ve placed the sky layer below the subject layer. Now with your subject layer selected, double click it to open the ‘Layer Style’ dialogue box. Make sure Blending Options: Default is selected on the left hand side and down the bottom you will see two sliders. Your aim here is to 'Blend if the underlying layer is darker'—so the washed out sky of your subject layer will disappear in the areas where your replacement sky layer is darker (this works best if your original sky is very pale and your new sky is darker). It’s trickier than it sounds. Alt click the left hand triangle on the ‘Underlying Layer’ slider and drag it to the right until your new sky begins to show up. Refine this by dragging the second half of your black slider to the right. Play around until you like how it looks. If this method messes with your foreground, place a layer mask on the new sky layer and brush it away from where it's not wanted. * This method left horrible white fringing around my subject layer that I couldn’t get rid of so if you’re finding this too I’d try another method. [gallery columns="2" size="medium" link="file" ids="1939,1938"]

Method four for replacing a sky – blend modes

[caption id="attachment_1773" align="alignright" width="234"]Blending-modes-with-arrow Blend modes[/caption] For this method I’d drag your sky layer above your subject layer. With the move tool selected (V) press Shift and + or – to cycle through your blend modes which can be found in the layer’s palette under the drop down menu that says ‘Normal’. If your sky is close to pure white you might find ‘Multiply’ works best. When you find one you like, add a white layer mask to your top layer and with this mask selected choose a big soft brush set to around 50% opacity and brush the new sky away from your subject and foreground. You may have to switch between black and white brushes to refine the mask until you’re happy. Be sure to erase the seam of the new sky image at 100% to get rid of any harsh lines. [gallery columns="2" link="file" size="medium" ids="1941,1942"]  

Method five for replacing a sky - gradient

[caption id="attachment_1943" align="alignright" width="150"]Gradient bar Gradient bar[/caption] This method is my favourite for replacing skies although if you’re looking for a very exact horizon line you won’t find it here. I like this method because it brings some of the sky over your image which adds atmosphere. It was particularly great for my image this week to mask out the distracting trees in the background (see my final image for the result!) Place your sky layer above your foreground layer. Add a mask to the sky layer and grab the gradient tool (G). In your options bar at the top, click on the drop down arrow next to the gradient bar and select the third Gradient optionsoption along the top which is black->white. Also make sure that the linear gradient is selected (the first box to the right of the gradient bar). With the sky’s mask selected drag your gradient tool from the bottom of your image towards the top. This creates a smooth gradient mask that makes your new sky fully visible at the top, tapering off to reveal the foreground underneath. If you didn’t get the gradient quite right keep redrawing it until you're happy. Vary the position where you start drawing the gradient and the length of the gradient you draw. With your mask still selected you may then have to use a soft brush tool loaded with black to erase the effect fully from your subject. Time Flies wm If you’re experimenting with different skies and you're working with one of the above methods that uses a mask you can Alt-click and drag your mask from one layer to another without having to create it again each time. When your new sky is in place I’d suggest playing around with the colours of the overall image (a selective colour adjustment layer is my go-to method) to make your sky and your foreground look like they belong together. A texture or noise layer may also help.

About 'Time Flies'

I chose a location to shoot this image which put the girl on a hill so I could shoot from below and see the sky behind. But I just wasn’t able to get back to the location to photograph it. Instead I cheated and shot myself in my backyard against a white sheet with the camera on the ground pointing up. So I’ve actually already replaced the background in this image once by painting a white mask around her. I then flattened her layer with a white solid colour layer and the lavender image for the purpose of this week’s example, however sometimes cutting out your person and sticking them on a new background might be the best (although not the easiest) solution to replace a sky. The lavender was photographed at Maleny Botanic Gardens, while the clouds were shot from my front yard. Three textures were used. [gallery columns="2" link="file" size="medium" ids="1945,1946"]   Let me know which method works best for you and if you know of any others please add them to the comments!  

[caption id="attachment_1888" align="alignright" width="300"]Too many photos Too many photos[/caption] I’ve been serious about photography for about five years now but even before that I always had a camera within reach. As a result I have over 80,000 photos in my Lightroom catalogue that I thought would never see the light of day, and the really exciting thing about compositing is that I can now choose any one of those 80,000 photos and build something out of it. The bad thing about compositing is that you start hanging on to every photo, even the truly awful blurry ones, because you just never know if it might one day make a great texture. [caption id="attachment_1889" align="alignright" width="200"]You can walk through my shot and I don't even care! You can walk through my shot and I don't even care![/caption] When I decided I wanted to be a conceptual photographer I noticed that my shooting style completely changed. Before, I always waited until exactly the right moment to click my shutter so that the composition was perfect and free from distraction. After, I started caring less about that perfect shot and more about the elements in the photo, knowing that I could cut them out later and create something new with them. So I no longer cared if people were walking through the shot or the horizon line was askew because all that mattered is that the subject I wanted looked good. There are plenty of purists out there who think compositing is cheating but I think they’re missing out on all the fun, so if you decide you’d rather join TEAM FUN and let compositing into your workflow you’ll want to start building a stock library. Of course you can always purchase stock from a stock photography agency which is great when you need a photo of something you just can’t capture yourself, but it’s always better to create something for free that is purely your own work. My initial goal this week was to make an image entirely out of purchased stock to demonstrate how to create something out of nothing but I realised it’s much more fulfilling working from your own stock library so I want to talk about how to build your own.

What to shoot for your stock library

If you already have an idea you want to work on then you’ll be guided by the elements you need to make it a reality. Otherwise these are some general things that every compositor’s stock library can't do without:
  • Landscapes – shoot environments to put your subjects into. If you can’t shoot your entire concept at the time it can help to take a blank shot of the scene and then a shot of the scene with someone in it so you can try and replicate their shadows and colouring with your new subject later on.
  • Skies and clouds – replacing skies is compositing’s greatest gift to photographers so photograph the sky in all its moods. Where possible, try to include a horizon line to match up with the horizon line in your composited image. More on this next week.
  • The moon – expose for the moon and not the sky or you’ll lose its details.
  • Foregrounds – I have sucked at this over the years and I regret it now so try and collect photos of interesting grounds and surfaces for your subjects to stand on.
  • Mountains – a mountain range will always make your horizon line more interesting and give depth to your image.
  • Buildings – think castles, churches, abandoned buildings. You can add these to the background to help set a scene.
  • Animals – it’s great fun sneaking animals into your images so find a zoo and spend the day shooting some creatures.
  • Birds – Shoot clusters of birds silhouetted against the sky. These are easy to add to your images using the blend mode ‘multiply’ and a levels adjustment layer to refine if needed. Also get close ups of different types of birds. I’m a little embarrassed to say that I recently found a dead Kingfisher outside my house and spent half an hour photographing it before giving it a dignified burial.
  • Props – interesting items that will help tell a story – ideas are balloons, lanterns, picture frames, vintage suitcases, clocks, birdcages etc.
  • Water – how you shoot this may depend on your idea – try throwing it around, shooting water lines in fish tanks, waves on the beach.
  • Textures
  • Fire – try shooting it against a dark background so it can be added easily with a blending mode.
  • Smoke – the wispier the better – You'll need to light the smoke and photograph it against a plain black or white background for easy blending.
  • People – I don’t have a single plain flat wall in my house so when I find one I try and photograph myself in different costumes and poses to add to landscapes later. I also like to go to events where people are in costume so you can cut out the costumes and use them on your model.
  • Flora – photograph interesting trees and flowers, mushrooms, moss, roots, vines.
  • Light rays and flares – these are really fun to include as special effects in your images. You can capture star-shaped flares by shooting a light with a high aperture.
[gallery size="medium" columns="2" ids="1890,1891,1892,1893"]

How to shoot your stock

Here's a few tips for shooting stock:
  • Shoot in RAW so you can easily change colour casts, exposure, contrast etc. later. [caption id="attachment_1894" align="alignright" width="200"]Speckled lighting sucks Speckled lighting sucks[/caption]
  • Expose for your subject, even if everything else in the image is blown out or underexposed.
  • Aim for flat, overcast or diffuse lighting. If your stock has harsh light or shadows falling across it you will be limited as to how you can use it.
  • Shoot props, animals, plants etc. as large as possible. You don’t want to have to scale these up to fit your image or you will lose resolution and image quality.
  • Shoot your stock in focus. It’s easy to blur an item later in Photoshop.
  • Try and shoot your stock from different angles. Eye height, waist height and crouching are good options. You never know how you’ll end up using your stock and you want as much scope as possible.
  • As I covered extensively last week, if you already have your base image and you want to shoot stock to composite into that base image, you must shoot it with matching light and angles.
[gallery columns="2" link="none" size="medium" ids="1895,1896"]

Building your stock library

If you’re building a stock library you’ll need some type of image organiser to help you sort your shots. I personally swear by Adobe Lightroom but others use Photoshop Bridge or Capture One. On1 also has their own version called 'Perfect Browse' which you can currently get for free through Fstoppers. When you import your photos you’ll need to go through them and assign keywords to the ones you’ll want to find in future. Decide on your keywords early on to keep them uniform. I use words like ‘texture, location, composite, sky, prop, tree, flower’. It’s important to remember to do this. Then when I need a sky I can just type ‘sky’ into my keyword search bar and have all suitable images at my fingertips. Whenever I import photos I always instantly hate them and can’t bear to look at them for at least a few days (it’s weird, I know) so I need to make time later to keyword them. Because of this only about a third of my 80,000 images are keyworded which is obviously not recommended! You are likely going to need more computer memory to store your stock as well as at least one external hard drive to keep a backup on. I’m a big fan of Western Digital products, particularly their palm-sized 2TB ‘My Passport’ external drives.

About 'The Parting'

Coming up with a concept for this week’s image was tough. I wanted to create an image entirely out of pre-existing stock without having to shoot something new but it seems my imagination doesn’t extend as far as building scenes from scratch. I first started out browsing the reasonably priced stock site Fotolia for photos of elements I haven’t been able to shoot myself. The great thing about stock sites is that you can download low res ‘comp’ images to play around with before committing to purchase. I built two concepts out of these but ditched them because they only included a couple of stock elements and I wanted a concept that used more. Abbey Medieval Festival boyNext I browsed through my own catalogue using the ‘composite’ keyword and settled on an image that I’ve always liked taken at the Abbey Medieval Festival of a boy in costume. I went searching for a ‘location’ to place him in and found these images of Eilean Donan castle which I shot in Scotland a few years back. I think they’re really nice landscapes but as my landscapes never see the light of day I thought I’d repurpose them in a composite. I liked that I’d shot the castle from a few different angles and I started thinking about how I could tell a story using companion photographs that takes place on different sides of the bridge. The two birds of prey and the dog were also photographed at the Abbey Medieval Festival, as was the girl. It took a bit of experimenting to find a costumed girl in a pose that worked. As I don’t have permission from either the boy or the girl to use their photos I covered both their faces in masks, also composited from photos of different people at the festival (taken on a different year). This was quite handy in the girl’s case because her face and chest were overexposed which is damn near impossible to fix. The boy’s horse was photographed at my cousin’s property, his sky was shot while I was riding a local ferry, hers in Malaysia. Her silhouetted birds were shot in Bath and his at a local beach. Because the light hit all these components in different ways it took a tonne of editing to make everything fit. I finished by overlaying the images with four different textures. [gallery size="medium" ids="1900,1909,1898,1904,1906,1911,1902,1907,1901,1903,1908,1905,1899"]   A stock library is not only handy for creating composites but shooting stock is also a fantastic way to improve your photography skills. Plus a great little money spinner if you decide to sell your stock to an agency. So grab your camera and start collecting!

The word compositing has a boring textbook definition that in a nutshell means “how the magic happens”. Compositing made it possible for Harry Potter to fly around a Quidditch pitch, for Spider-Man to swing between buildings, and for men to walk on the moon. (Just kidding.) (Or am I?) By combining elements from different pictures into one, compositing allows photographers to trick you in more ways than you could possibly fathom . It's used by wedding and school photographers to remove blinking faces in group shots, by newborn photographers to create those baby sleeping with head on hands shots, by landscape photographers to switch a boring blue sky with a moody cloud-filled one. So how does compositing work? Let's say I want a photo of me climbing the Eiffel Tower. I take a picture of me pretending to climb something, use Photoshop to cut myself out and paste me onto a picture of the Eiffel Tower and voila, there I am climbing the Eiffel Tower. However without following the rules of good compositing there’s no guarantee it’ll look convincing. Admittedly compositing TERRIFIES me, not only because it offers unlimited possibilities—the indecisive person’s worst nightmare—but also because there’s a lot to get right for a composite to look real. I’ve done compositing in previous tutorials but in most cases all the components were shot in the same location with the same lighting and camera position so the chances that something wouldn’t fit were low. The stakes are much higher when you’re trying to piece together images from entirely different situations.

How to photograph for a composite

To work through the process of compositing I'm going to use the image I created this week, 'Dream's Quest' as an example. It wasn't until I finished the piece that I realised it vaguely resembled the painting 'The Lady of Shalott'. [gallery columns="2" link="file" size="medium" ids="1871,1863"]   The first thing you need to do when creating a composite is to choose / take the photo that you want all your other elements to match. I have hundreds of photos of locations that I’ve photographed over the years specifically for the purpose of one day compositing a person into because it’s rarely practical to have the costumes, equipment and time needed to create a conceptual image whenever you see a pretty scene. This base photo becomes the one you have the least control over because it’s probably too difficult or costly to go back and shoot it again. So you need to assess this photo so you can make all your other elements match. Dream's Quest composite base imageFor Dream's Quest my base image was a photograph of a lovely painterly garden I took in Pitlochry in Scotland. I wanted to ease into compositing with the simple aim of shooting myself separately and making myself fit into the garden scene. When shooting your composite components you’ll need to consider the following:
  • The location – Where was your base image shot? In a grassy field? In a desert? In water? To make your components fit their new location it helps to shoot them in a similar situation - on grass, on sand, in water. Also, what colour was the original background? If the base image is a green field you might want to shoot your subject on a green background so their skin reflects the right colour. Alternatively, consider shooting your components on a contrasting background (ie pale skin on black, dark skin on white) or using a chroma key style blue or green backdrop to make it easy for you to cut them from the background.
Dream's Quest composite postBecause my base image was an overgrown garden I shot myself sitting in grass in my backyard so the foliage and the colour would match between scenes. Had I not been wearing a green dress, shooting on green would also have made it easy to select myself out of my background by using Select->Color Range, selecting the greens and them adding a layer mask that hides the selection.
  • The lighting – Where is the scene lit from? Is the light hard or soft? What is the colour balance of the light—white 12pm daylight or tungsten 6pm sunset? When shooting/sourcing other elements to composite into your base image you have to ensure this lighting matches in each shot so you’ll need to recreate the lighting using natural or studio lights or attempt to fake the light quality in Photoshop.
My background image was shot on a very overcast day close to dusk so I made sure to also photograph myself on a cloudy day. I noticed the light in my backyard was bluer than my base image so I changed my camera’s white balance to make it warmer although I could also have achieved this in Photoshop. The two birds were photographed on sunnier days and I couldn’t quite get them dark enough in Photoshop to fit my scene so I decided to paint in some motivated light on the right of the image to make their lighting look realistic. [gallery columns="2" size="medium" ids="1866,1867"]  
  • Perspective / Angle – If your scene is shot front on then all other elements also need to be photographed front on. If I tried to make an overhead shot fit a front on scene the perspective would be wrong and it would look ridiculous.
I don’t know what height I shot my garden image from (which is why it’s handy to use a tape measure when shooting for composites) but I made a fairly safe assumption that it was from eye height. So I set my tripod to eye height to match. Because the boat was the feature of my original image I also guessed that I’d angled the camera down slightly, so I did the same with my tripod. The boat was lower than camera height and was positioned facing slightly towards camera so I sat on the ground and angled my body to match.
  • Dream's Quest composite oarPosing – Be sure to position your person, prop or scene so it will fit your base image. If you’re compositing a prop onto a person make sure they’re posed in a way to accommodate this prop by giving them something of a similar size or shape to hold.
I didn’t have an oar, however I remembered I’d shot one while staying at a friend’s house so I played around with that oar photo to see if I could make it fit. When I posed myself I held a rake as a stand in for the oar so that my hands realistically looked like they were holding something. I also had to be mindful to pose my hands so they’d roughly cover the original hands in the oar photo.
  • Distance – It helps to shoot all your elements from roughly the same distance and with the same lens set at the same focal length to ensure consistent perspective and scale. This isn’t always crucial (although it would be if you shot your scene with a very wide angle lens and your subject with a zoomed telephoto lens because of the distortion and compression the different lenses create) but it will mean that your components are less likely to look ‘off’.
This one scared me a bit because I wasn’t shooting with the same camera or lens. The original scene was shot at 15mm on a cropped frame while I shot myself at 50mm on a full frame. I tried to position myself in the same rough area as the boat so that the area of contact between my body and the new ground would meet (although weeds ended up covering this spot anyway). You can always paint in shadows or place something over the area of contact to stop your person look as if they're floating. I had some trouble resizing myself accurately which is where replication of distance would've come in handy.
  • Focus / Aperture – If you shoot your subject so their eyes are in focus and everything else is blurred [caption id="attachment_1869" align="alignright" width="300"]A bad composite - the girl is out of focus but the suitcase is in focus A bad composite - the girl is out of focus but the suitcase is in focus.[/caption] and yet the background is shot so everything is in focus, as soon as you put that blurry person into that sharp background it’s going to look horrible and fake. You also need to ensure that the area you focus on in the second image matches the focal point in your base image.
I shot my original scene at 1/200, f/5.6 so I made sure to shoot myself with the same settings. Because I’d focused on the boat originally I knew that if I sat in the boat then I should shoot myself in focus also. It’s best to shoot all your components as sharp as possible because it’s easy to blur things in Photoshop. Much harder to make something sharp.
  • Image quality – If I shoot my person in RAW with a full frame camera and then composite them into a background photo that’s a low quality JPEG, there’ll be a mismatch in resolution and noise.
I always shoot RAW which avoids these issues but if you're working with a purchased stock image it might be lower quality. So while it’s not ideal you could always add noise to the RAW image to make the two match. If you’re worried your composite won’t work you can try doing a test shoot and a rough composite first to see if there’s anything to it. Learn to make peace with the fact that sometimes you’ll need to shoot your components more than once to get them to fit. As frustrating as this may seem it’s all part of the learning process.

How to edit a composite

Once you’ve shot all your elements you’ll need to cut them out so they fit into your scene. Which selection tool you use for this task is personal choice. They’re either wildly inaccurate or time consuming so I personally use either hand painted masks or the pen tool. Obviously the more accurate your masks are, the more convincing your end product will be so don't take shortcuts here. Also remember to feather your selections a little using the 'Refine Edge' or 'Refine Mask' commands so your cut out pieces don't look too sharp. Dream's Quest close up detailIn Photoshop I placed the girl layer underneath the garden layer and then masked out the garden to see through to the girl below. It didn’t occur to me when I was creating this composite how difficult it was going to be masking through all the flowers, plants and the structure of the boat to see through to the girl so I zoomed in as close as I could get and painted a black mask on my background image using a square brush. Seriously guys, using a square brush for fine masking has CHANGED MY LIFE. Pixels are square so why use a round brush! Now THE most important thing in making your components match is to assess their saturation, colour and contrast. You don’t want one element too bright or too green because they’re going to stand out so use clipped adjustment layers to get each element to match. For this I use Phlearn’s fantastic ‘Checks’ method which is available as an action when you purchase a Phlearn Pro compositing tutorial and is a handy tool if you’re serious about compositing. [gallery size="medium" link="file" columns="2" ids="1878,1877,1879"]   When you’ve cut out your subjects and placed them on their new background you need to think about how to make them look like they belong there instead of just slapped on. There are a few ways to do this:
  • Shadows – Giving your subject a shadow will connect them to the ground. Study the other shadows in your base photo and try to replicate them in Photoshop for your subject.
For my image I was lucky that the contact point between myself and the ground was hidden by weeds so I didn’t have do any work here. It was also very soft diffuse light so shadows would be unlikely. However, I did draw some grass in front of the pelican’s feet and the oar to make them fit.
  • Blur – Adding blur to your background image will give some depth to your scene and pull focus to your subject.
I added a little blur to the front left of my image and some to the sky so the busy plants weren’t so distracting.
  • Depth – Adding depth to your photo so it has a foreground, middle ground and background helps pull everything together. Composite something from the scene in front of your subject. Maybe part of a tree or plant can cross over their body. Adding mountains into the background gives dimension and draws the eye through the scene.
My scene already had its own depth with the path and the hedge but as mentioned above I did use weeds and grass from the background to cover parts of my subjects. When you’re done there’s a couple of other tricks that will help sell your composite. First, add a little of the same colour to your entire image to tie the pieces together. I like to add a Selective Colour adjustment layer to the top of the layer stack and play around with the colours. Also try adding a small amount of overall noise with a noise filter or a texture as discussed previously to give your components a common element. So yes, compositing is one scary beast! But after dipping my toe into the waters this week I discovered that it’s not nearly as frightening or exact as I thought it would be. And considering compositing makes ANYTHING possible then it’s surely worth the work to get it right.

[caption id="" align="alignleft" width="150"]Double Exposure Sara Byrne[/caption] [caption id="" align="alignright" width="150"]Set them free 'Under the waves' by Aneta Ivanova[/caption] If I were forced to choose one photography technique to spend the rest of my life perfecting it would be the double exposure portrait. This involves taking one portrait and one scenery shot and smooshing the two together. The popularisation of this technique is attributed to Sara Byrne but for me it’s Antonio Mora who truly made it an art form. I also think the work of Aneta Ivanova is really beautiful. My biggest problem with this technique is that it has such a dull name—the double exposure portrait—so I’d really love to coin a new term for it. The ‘portscape’ perhaps? For a long time I assumed this technique would be really hard to do. Anything with such utterly stunning results could never be simple, surely? Well fortunately I was wrong. Not only is this technique easy it’s also SO MUCH FUN.

How to photograph a double exposure portrait (aka portscape)

There’s two ways to shoot a double exposure portrait depending on the tools you have to hand.  If you’re lucky you may have a camera that has this feature inbuilt, like my Canon 5D Mark III, so be sure to check your manual. If not, you’ll just have to photograph your two exposures separately and combine them in Photoshop—a method which offers much more control. Plain portraitIn either case you’ll need to shoot the portrait first. Your second image will show through in the areas where your first image is darkest. Therefore it’s best to shoot your portrait against a light background to retain the silhouette that will contain your second image, whether this be against a white sheet or a blown out sky. I shot my image in my garage against a white sheet. I used a Speedlite with a shoot through umbrella to spill light onto my face because I wanted less of the second image to be visible over my features. I kept my hair dark because I wanted more of the second image to show here. Then you’ll need to shoot your second image although if you don’t have a multiple exposure capable camera, feel free to just use images from your back catalogue. I expected there’d be some exact science for capturing the precise lights and darks for your chosen images to match, and maybe there is, but because of the unpredictable nature of this technique I’m yet to put my finger on it. From my own experimentation I can tell you that flowers and buildings look the best and blue skies look the worst.

How to create a double exposure with a Canon 5D Mark III

The really great thing about doing this in camera is that you don’t have to shoot your portrait DIRECTLY beforehand. All you need to do is make sure your portrait is on the same card that you’re shooting your second shot on. So I shot my portraits, imported them to Lightroom, chose my favourites and loaded those back onto my card. The other cool thing is that when the camera creates your combined image it also keeps a copy of both the single exposures separately so you can then play around with the two images later in Photoshop if the merge didn’t come out exactly how you wanted. When you’re ready press the Creative Photo button, choose the middle Multiple Exposure button, and press SET. Select ‘Multiple exposure’ and choose On:Func/Ctrl. I’m not going to cover what the other settings do because our purpose here is just to create a double exposure portrait. For ‘Multi-expos ctrl’ I find ‘Additive’ works best but feel free to play around with the other options. Choose ‘Select image for multi. expo.’ and find the image you want as your base portrait. *Images courtesy of Canon. [gallery columns="5" size="medium" ids="1813,1815,1816,1812,1814"]   You’re almost ready! Switch Live View on so you can actually see how the two images look overlaid. Choose the exposure for your second image and move your camera around until the two images are combining in a pleasing way. Sometimes you may end up with your camera upside down, which will be sure to amuse any other photographers standing nearby. Don’t let them ruin your artistic genius! Focus and press the shutter button and you’re done. This shooting process takes time so you don’t want to be in a hurried situation. Annoyingly you’ll need to load your base image each time you want to take a different double exposure. (If you choose ‘continuously’ in the Multiple Exposure menu the next photo you take becomes the base for the following image and so on. If anyone knows a way to keep an image loaded please let me know!)

How to edit a portscape

If you’ve shot your double exposure in camera then it may not need further editing but I was interested to see what variation I could get from the same images when combining them myself. The camera gives you four blending modes and three aren’t so great whereas Photoshop gives you over 25. In finding images to combine with my portrait I wanted to experiment with three different options:
  1. The secondary images I’d shot when photographing double exposures in camera.
  2. Photos from my back catalogue that I thought would work well in a double exposure.
  3. A special image I’d shot to use as this week’s feature image – my aim was to create an image that told a story, which I haven’t seen much in multiple exposure form before.
Interestingly I found the images I’d shot specifically while creating double exposures in camera worked much better than any I selected from my catalogue, even though I hadn’t really liked how they’d originally looked when combined in camera.   [caption id="attachment_1817" align="alignright" width="960"]Shot in camera. I should have cleaned up the portrait backgrounds first but they grey backdrop allowed more of the second image to show through. Shot in camera. I should have cleaned up the portrait backgrounds first but the grey backdrop allowed more of the second image to show through.[/caption]     [caption id="attachment_1821" align="alignright" width="240"]Cleaned up the background Cleaned up background[/caption]   Load your portrait image into Photoshop. Because the background of my image wasn’t a uniform white I had to do some clean up work so I used the magic wand (w) with contiguous turned ‘off’ to select my background. I turned this selection into a layer mask with the 'Add layer mask' button and then chose Select->Refine Mask to fine-tune the selection around my hair. Had I shot my  portrait against a cluttered background then this selection process would have taken much longer. I created a ‘solid color’ adjustment layer filled with white and dragged this underneath the portrait layer. Now I had a perfectly white background behind my portrait. Next load your second image(s) in layers above the portrait. I usually select these images in Lightroom, choose ‘Edit in-> Open as layers in Photoshop’ and then from the resulting document I use the move tool (v) to drag the images one by one to my main portrait image. I’m sure there’s a better way but this is just my process. Blending-modes-with-arrowStart playing around with your blending modes. I introduced these to you last week but to recap … Your blending modes live at the top of your layer’s palette in the dropdown box that says ‘normal’. Click the drop down menu and select each of the different blending modes until you find one that blends your images together best (a shortcut for this is to make sure the move tool is active (v) and then press Shift + or Shift – to cycle through the modes quickly.) The blending mode that worked best for me was usually ‘Lighten’. You will probably have to move your top image around so it fits to your portrait in a really nice way. I tried to line up aspects of my second image with my facial features. [gallery columns="4" size="medium" link="file" ids="1838,1837,1836,1835,1834,1833,1832"]   At this point you can get really fancy and start messing with things like levels and curves to change the contrast and colour of your images, masks to paint out anything you don’t want seen and duplicating parts of your second image to fill in areas that need more detail. But it’s totally up to you. For now I chose to spend more time on double exposures that just work, rather than forcing them to look better. Sadly the MacBook Pro I use for editing died during this process (happily it was saved ten days later) but I didn’t get to play around as much as I’d hoped to with this technique so I’m really excited about future experiments. [gallery columns="4" size="medium" link="file" ids="1828,1827,1829,1830"] [gallery columns="4" size="medium" link="file" ids="1831,1839,1841,1840"] [gallery size="medium" link="file" ids="1825,1824,1826"]

Composite image for The IdeaHow I shot The Idea

Right after I shot my self-portraits in the garage I photographed myself holding a lantern shaped like a lightbulb (purchased from the Leukaemia Foundation). I wanted the scene as dark as possible with just some light on the lantern and my face (from a Speedlite with a shoot through umbrella) because I only wanted the face and lantern showing up in the hair of my main portrait image. At the time I didn’t know if it was going to work but I’m pretty pleased with how the two shots combined using the blending mode ‘Lighten’. Good idea don’t you think? ;)

This week I found myself in a rut when I realised all my photos were starting to look alike—the posing, the colouring, the framing—and while that’s all part of developing a style I got frustrated that after 12 weeks I’m not coming close to capturing the look I set out to achieve. I particularly struggle to get my colour toning right even though you’d think that’d be the easy part of creating a complex image. So I decided to start playing around more with texture. In most of my images I’ve used a texture or two but on such low opacity that you’d barely know they’re there. This week I wanted to create an image where the texture is as much a focus as the subject. [gallery columns="2" size="medium" link="none" ids="1766,1767"]

What is texture?

For years I’ve been photographing walls and wood and rust and rocks. I even have a friend who, when he sees me, usually remarks, “there’s a rock over there you might want to photograph”. I do this to build up a texture library because when you add a texture over the top of your main image and start playing around with Photoshop’s blending modes the textures can make your image come alive in wild and unpredictable ways. Textures are also beneficial for when you’re compositing elements together from lots of different photos. By adding a texture over top it helps to tie the elements together in a believable way. Using textures is a favourite technique of conceptual photographers because by adding texture to your work you’re showing your viewer that what they’re looking at has been manipulated in some way, suggesting an element of make-believe and distinguishing the photo from a fashion or beauty image. Using textures over still life or macro images also adds an extra level of interest and a tangible feel to the photo. [gallery columns="2" size="medium" ids="1768,1769"]

How to build a texture library

You’ll find many photographers offer free texture packs for download. Digital Camera World is a good start and the source of some of the textures I played around with in my image this week. While I like to shoot my own textures I also download free textures whenever I find them because I see no harm in having a wide range of textures available at my fingertips. Shooting your own textures is easy and really only limited by your imagination. I’m positive if you grabbed a camera you’d find five decent textures in the room you’re in right now. Try and find textures with lots of detail and textures with minimal detail, textures that are both in and out of focus, brightly coloured and muted textures, textures with lots of contrast between light and dark and textures with almost no contrast. Just about anything can work as a texture. I’ve used clouds and flowers and leaf litter, dirt, fabric, lights and fur. When I visited Malaysia last year the textures were so magnificent that I shot more photos of walls then I did of my travel companions. You can even buy a book on Georgetown street art where half the pages are photos of textured walls. So I’ve decided to offer a free pack of Malaysian textures to get your texture library started. Click to download your free Malaysian texture pack! [caption id="attachment_1774" align="aligncenter" width="300"]Texture example Example images[/caption]  

How to use textures

When I’m looking through photos in Lightroom I’ll tag anything I think might work as a texture with the keyword ‘texture’ (groundbreaking) so I can easily sort and find them later. Many photographers convert their textures to black and white because after spending so long on colour toning they don’t want to apply a texture that’ll mess it up. Personally, I prefer to use coloured textures because they help me see which colours enhance my image so I can then recreate those colours how I want. I don’t start to apply textures to an image until I’ve finished arranging all the other elements in my photo to perfection and done any required sharpening. I’ll then cycle through my Lightroom textures choosing about ten. If my subject is in the centre of the image I’ll look at textures with light centres and dark edges which might add a natural vignette; I think about how much detail I want my image to have and choose a texture accordingly. And then I usually throw in a couple of crazy textures just to see what they’ll do to my image. If you can’t get a texture to do what you want, remember you can use filters and adjustment layers to change the texture’s colours, saturation and contrast and use masks to paint them in only where you want. It’s generally advised to mask a texture from a model’s skin so they don’t appear unnatural and it also helps draw attention to them. Blending-modes-with-arrowWhen I’ve finished working with my main photo I open my textures as layers in Photoshop at the top of my layer stack. I resize each texture (using Ctrl T) so that they cover my whole canvas. I’ll lower the opacity of the layers to about 60% and switch the eyeballs off on all but one. Then, at the top of your layer’s palette you’ll see a box that says ‘normal’. This is where your ‘blending modes’ live. Click the drop down menu and work through the different blending modes to find one that blends your texture into the main image in a way that you like best. (A shortcut for this is to make sure the move tool is activated and then press Shift + or Shift – to cycle through the modes quickly.) You may find a couple you like so duplicate your texture layer (Ctrl J) and apply both for comparison or, if the texture isn’t working at all, just delete the layer. When you’ve found a few you like, click your layer eyeballs on and off for comparison. Remember to change your layer opacity for more or less of the effect and then narrow down your textures until you have a favourite. Of course, you can use as many at once as you like and use layer masks to apply them to only certain areas of your image. [gallery size="medium" ids="1775,1768,1778,1780,1779,1776"]   [caption id="attachment_1781" align="alignright" width="200"]Disaster Disaster[/caption]

How I photographed ‘She Brings the Night’

Photographing 'She Brings the Night' was the most mortifying shooting experience I’ve ever had. Here’s me in a long blonde wig and a black velvet dress taking photos of myself on a busy beach at twilight. It took 20 minutes to blow up the round balloon I was to cradle as a placeholder for the moon and it blew away along the beach before I even got the chance to use it. It was really windy so my wig and dress were blowing all over the place and I was worried about getting sand in my camera bag. I wanted my flash to illuminate the spot where the moon would be but I couldn’t get it to trigger and I was well over this shoot before it began. As a result the pose and the camera angle are really awkward. I forgot to shoot a blank shot for compositing and I stupidly expanded my frame without it occurring to me that the sea is moving and so my shots would never line up. I nearly didn’t edit the images at all because I figured the whole thing was just a disaster. Thank god for Photoshop. Using layer masks I blended together different shots of the sea, my feet, my dress, my upper body and my arm. Because I forgot to take a blank shot, my feet were in every image so I had to clone extra sand and water around my feet to match the sea image I liked. The moon and the “moths” (really butterflies from eBay) were shot separately on contrasting backgrounds while the clouds are from a stock image. Blending modes are not only great for applying textures but can also be a fast and wonderful way to composite in other elements without having to make complex selections, so you should always try playing around with blending modes first before hitting the selection tools. I was able to composite in the clouds using the ‘soft light’ blending mode so I didn’t have to spend time cutting them out, but the moon and moths didn’t work as I’d hoped so I had to select these with the ‘quick selection’ tool to remove them from their pre-existing backgrounds. [gallery columns="4" size="medium" ids="1783,1785,1787,1788,1782,1786,1784,1789"] I used the following five textures to get the final look: [gallery size="medium" ids="1790,1793,1794,1792,1791"]   So with the addition of some textures I was able to create an ethereal deity out of an awful shooting experience and it was one of the easiest edits I’ve ever done. Amazing. Feel free to use my Malaysia textures in your work however you’d like. I’d love to see the results!

[caption id="attachment_1752" align="alignright" width="200"]Ugh Ugh[/caption]   A few week’s ago armed with my camera, my mother (who was convinced I was going to get murdered) and a $20 piece of fabric I disappeared into a forest to try and build a dress. But we got there too early and the sun was all wrong and I had to shoot all the components three different times because although I kept moving out of the sun the sun kept following me and my props weren’t working and the mosquitoes kept biting and my makeshift dress kept falling off and tripping me, and really, the whole thing was just a disaster. And it makes me wonder how many photos are born out of similar stories. Certainly most of mine. However, were I a more emotional person, I would probably weep with joy on a daily basis at Photoshop’s magical powers. Honestly, I don’t know why they haven’t changed their motto to … “It turns out you CAN shine sh*t!’ Because so often I’ve taken a photo I wasn’t feeling good about and watched Photoshop transform it into something well beyond expectation. For example, I can buy a $20 piece of fabric, throw it around in a forest and manage to create a beautiful, unique, priceless dress fit for any mosquito-bitten princess.

How to photograph dress and hair flicks

So, how to make a pretty outfit out of next to nothing? For the sake of elegance you’ll likely want to create a dress with a cinched, flattering waist and a full, flowing skirt so I recommend working on the top of your dress first. You can either wrap your top half in fabric or simply put on a dress that has a skirt you’d like to make longer or fuller. If you’re really ambitious you can choose to use a patterned dress but for the sake of your sanity when matching up all the pieces later I’d suggest working with a plain fabric. From my own stupid mistakes I also wouldn’t advise using a translucent fabric. Sheets work wonderfully, which is how my shoot started out, but clever old me changed my mind last minute. As usual you’ll need to set up your camera on a tripod. Compose, expose and focus, as covered extensively in my previous posts, then lock your settings and camera position so nothing can change. Begin by shooting you or your model’s pose first. You really want to concentrate not only on getting the pose right but also that the top of the dress looks just how you want it, even if you have to capture these in two different shots to blend together later. [gallery columns="2" size="medium" ids="1743,1742"]   Now’s where things get interesting. Next you need your model to take the dress off. This part CAN be done while still wearing the dress but it all depends on how billowy the skirt is and how you want your final dress to look. You want to start throwing your dress or fabric around. Your aim is to photograph the dress moving in different ways so you can combine the photos later in Photoshop to make the dress look much larger than it is. If you’re still wearing the dress you can try flicking your skirt to the sides. If your model is now semi-naked you want to hold the dress (by the waist) or the fabric (by the top) and start throwing it up and around but try and pull the area you are holding back into your waist just as the camera clicks so that the fabric looks like it’s naturally billowing from the waist area as it would with a real dress. [gallery columns="2" size="medium" ids="1745,1746,1747,1748"]   The same principle works with hair. If you want to make your model’s hair look longer or more full get them to either put their head down and then flick their hair back or use their arm to flick it out to the side. They’re going to get dizzy and their face will probably look stupid but it’s all for the sake of beauty. Now hair is incredibly hard to cut out and I don’t want to go into great detail about it but there’s two ways to minimise the horror. The first is to make sure you’re shooting on the same background that the main pose was shot on. If that background is neutral or blurred, even better, because you won’t have to be masking between individual hairs. The second way is to shoot against a colour that is the opposite to their hair colour. It’s great to have a sheet or reflector handy so you can shoot dark hair against a white background and blonde hair against a dark background. The selection tools in Photoshop look for areas of contrast so this makes it much easier for it to recognise the hair. It also allows you to use blending modes (more on this next week) to speedily mask the hair into your image. This may all sound too hard but trust me, it’s worth it in the long run. And I know, because I never follow my own advice and have wasted far too much of my life trying to fix stupid hairs. [gallery size="medium" ids="1749,1750,1751"]   And of course don't forget to take a blank shot of your scene!

How to edit dress and hair flicks

Firstly you want to open your background with the main pose image layered above. Then cycle through your RAW shots and pick the fabric and hair shots you want to composite onto your main image. The dress is usually easiest so I like to start there. To save on file size I prefer to cut my fabric out of its background before I paste it onto my main image (even though this image STILL ended up being 18GB which actually BROKE my MacBook Pro). For ‘If You Go Down to the Woods Today’ I worked through all the selection tools to see what would work best. I suggest trying the magnetic lasso, the magic wand, the quick selection tool, the background eraser, the blending modes and color range (under Select ->Color Range) until you find one that works best. I thought color range would work great for me considering I had a red dress on a primarily green background but I was seriously having zero luck with all of these tools (although color range is best at preserving transparent areas so keep this in mind when working with translucent fabrics). Eventually I got fed up and drew a rough lasso around each piece of fabric, feathered the selection (using Refine Selection or Refine Mask) until it looked OK, then chose Select -> Inverse and deleted the rest of the image. I moved the fabric that remained onto my main image and placed each piece where it fit best and formed the shape I liked. I had to do this roughly at first and then fine-tuned it with a second pass. For the hair I had much the same trouble with my selection tools (I suspect because the ends of my hair and fabric have quite a bit of motion blur) so I chose the photos I liked (with some I had to Edit->Transform->Flip Horizontal to get the hair flying in the right direction), roughly lassoed around the area and copied these onto my main image, moving them into a position that looked natural. If you’ve shot on a contrasting background your selection tools should work a treat. (For a more advanced technique you can try using the Refine Radius brush in your Refine Mask options to force Photoshop to better detect the hair but I find it a bit hit and miss.) [caption id="attachment_1753" align="aligncenter" width="300"]Hair flick horror Hair flick horror[/caption]   In both cases I had some images where the colour and luminance of one flick was wildly different to the colour of the others so I had to clip an adjustment layer to the problem images Alt click between the adjustment and image layers) and use curves or levels to make them match. For some areas of the dress I wanted it to look as if there were many panels of fabric flying in different directions but usually I like the dress to look like it’s fully intact, so to blend your fabric together add layer masks to each fabric flick and using a low opacity and very soft brush, mask away parts of the fabric until it blends into the underlying fabric layers. Best to work through the layers one at a time while switching the other layers off. Sometimes the healing and spot healing brushes work great for blending fabric also. Just use them to paint along the seams. Be mindful to assess the direction of light in your image and how shadows are falling and ensure to replicate this in your dress. The easiest way I’ve found to blend hair together is to vary using a brush of soft to medium hardness on a low opacity to brush around your hairs (and because I always work non-destructively I paint on the layer mask, not the layer itself). It’s not foolproof but it’s generally good enough. If your hair is giving you real grief you can also sample a colour of the hair (alt click with paint brush tool) and use the smudge tool to paint fake hair in, or use a specially designed brush for the purpose of drawing in hair such as the one at this link. The thing I most love about using hair and dress flicks in my images is that it adds that extra element of magic to your story by bringing motion to a static image and turning your hair and dress into characters of their own.

Whenever I’m travelling and have time to kill in my hotel room I like to try and take a conceptual photograph because … well, that’s what everyone does, right? Finding private locations to shoot conceptual photos in is one of the biggest difficulties of this type of photography so it’s always a bonus to have a new location all to yourself. The challenge though, is trying to come up with a concept in limited time when you’re unlikely to have fancy costumes on hand and the most inspiring prop within reach is some free body products and, if you’re somewhere REALLY ritzy, a pair of terry towelling slippers. Hotel room clonesFor me, the obvious choice in this situation is to take a ‘multiplicity’ photo where you lock down your camera, take photos of yourself posing all over the room and then combine them later in Photoshop. Taking cloned photos of yourself is about the most fun you can have with a camera, even if seeing yourself duplicated many times over is ultimately horrifying. Since you’ve mastered masking after last week’s lesson, the post production for multiplicity images is pretty easy. It’s just a matter of laying all your photos on top of each other and using masks to reveal yourself in each photo, and because the camera hasn’t moved this is usually a breeze.

How to photograph a multiplicity image

As we learned last week, the most important aspect of taking photos that utilise masking is to a) set your exposure and then lock down your settings so they cannot change and b) take a blank shot of your scene without your subject – this isn’t entirely necessary for multiplicity but it’s a good habit to get into. I like to take this blank shot at the end in case something in the scene has moved during the course of the session, but it doesn’t hurt to take one at the beginning too.
  1. To get started you’re either going to need a tripod or something to rest your camera on. It IS possible to take a multiplicity shot hand-held (using someone else to model) and get Photoshop to align the layers later, provided you keep mostly still.
  1. Set your exposure in manual mode. The mistake I ALWAYS make with multiplicity images is not setting a narrow enough aperture so my background people are always out of focus, so aim for f/11 or higher. If you need a low shutter speed to compensate try to keep still when you’re posing. Do not touch your settings again. [caption id="attachment_1630" align="alignright" width="200"]And for god's sake, don't be so stupid to photograph a multiplicity image in front of flashing Christmas lights that change colour. And for god's sake, don't be so stupid to photograph a multiplicity image in front of flashing Christmas lights that change colour.[/caption]
  1. If you’re outdoors, choosing a white balance other than auto is advisable because the light is always subtley changing and you’ll save yourself work in post.
  1. Think about your poses. If clones are intersecting it will take more work in Photoshop to cut around them. You also don’t want one clone entirely covering another so try and spread yourself (or your subject) evenly around your space and keep the rules of composition in mind. Be mindful of where the light and shadows are because if one clone is well lit and then you put another clone between them and the light, you’ll have work on darkening that first clone in Photoshop for believability.
  1. Focus on the area where you’ll be striking your best pose and then lock your focus (switch to manual or back button).
  1. If you’re taking self-portraits you’re going to need a remote or to use the 10 second timer.
Get cloning! [caption id="attachment_1631" align="alignright" width="300"]The photographs that make up my multiplicity image The photographs that make up my multiplicity image[/caption] I shot my multiplicity image at a koala conservation park ten minutes from my house (they grow trees here to feed koalas, but there’s no koalas just hanging out, sadly). I can’t find any information about it on the Internet so it’s a bit mysterious. I live in a state whose slogan is “beautiful one day, perfect the next” (even though there’s a severe storm baring down on us as I write this) so getting the overcast light I like is damn near impossible. This was shot on a semi-cloudy day in a bit of a rush with my assistant (mum) pressing the shutter because I was too far away for my remote to register. I chose the idea of the clones playing hide and seek because I liked the idea of having them interact in some way without actually touching.

How to edit a multiplicity image

If you’ve imported your images with Lightroom, select the images you’ve chosen to work with and go to Photo -> Edit In -> Open as layers in Photoshop. (Remember that if you’ve edited one of your photos in Lightroom, to sync those same changes to all the images you’ll be using; the same goes for Adobe Camera Raw). I don’t use Bridge but I guess it’s much the same. Otherwise you can open Photoshop and choose File -> Scripts -> Load files into stack and choose the images you want to work with. If you were shooting handheld, select all your layers and choose Edit -> Auto-Align Layers, or you can try lining them up yourself by lowering the opacity of each layer and nudging them into place (move tool + arrow keys). [caption id="attachment_1597" align="alignright" width="150"]Add layer mask Add layer mask[/caption] Make sure your main image is at the bottom of the layers panel and hold down Alt (PC) or Option (Mac) and click the eyeball of this layer so it turns off all your other layers. Multiplicity edits can get confusing so label your layers and work on a layer at a time. Turn the eyeball back on for the layer above and click the ‘Add layer mask’ button. This should add a white mask to the layer so it’s still fully visible. Then, as we learned last week press B to choose the brush tool then D to make it the default colours, and X to bring black to the front. Paint over the areas you want to hide in your image. If you make a mistake, hit X again to bring white to the front and paint over the problem area to bring it back. This can take a bit of to-ing and fro-ing to get right. As you work through your layers it might become easier to invert your mask (make it black) so nothing of that layer is visible (Ctrl+i / Cmd+i) and just paint back in the portion you need. [caption id="attachment_1635" align="alignright" width="300"]Masks for multiplicity Masks for multiplicity[/caption] Because your background is static and only your subjects have moved your masks don’t have to be perfect because your surroundings should align perfectly. But for trickier overlapping clones you may need to work on fine detail with your selection tools. I won’t go into detail about this here because selection tools can fill a whole book but there’s plenty of great articles and videos out there to get you up to speed. Otherwise, zoom into your image and using a brush with a hardness that matches the edges in the photos, do some very precise painting around your clones. If you’re also finding colour changes between your layers I would add either a levels or curves adjustment layer and clip it to your problem layer (Alt or Option click between the adjustment layer and the layer you want to affect to clip them together so the change will only affect that layer and not all underlying layers) then change the colours and brightness to match the background layer. Levels and curves default to RGB colour but if you go into the drop down menu you can change this to be colour specific ie. blue/yellow, green/magenta, red/cyan. [gallery columns="2" link="file" size="medium" ids="1633,1632"]   [caption id="attachment_1634" align="alignleft" width="199"]You can even clone body parts! You can even clone body parts![/caption] While multiplicity images are fun to photograph, I’m not a great fan of the results because I find it distracting to have so many subjects in my images. However, multiplicity is a really useful technique for duplicating objects which I’ll cover in a future tutorial. Now I must go and prepare for this impending storm. If only I had real clones to do my bidding (no playing hide and seek on my watch!) Backyard dancing girls    

The majority of people with a functioning camera will at some point have snapped a panoramic photo—a process that involves swivelling the body from side to side while taking a series of photos to capture the full range of a scene so beautiful it can’t be contained. (That last bit felt like it needed to be in bold.) [caption id="" align="alignright" width="240"]A Bridge Just Right 'A Bridge Just Right' by Ryan Brenizer[/caption] Then a cunning fellow named Ryan Brenizer started using this technique for portraits, but instead of just moving side to side he moved up and down and all around while using a wide aperture to create a very shallow depth of field, and stitched the photos together later in Photoshop. Thus, the Brenizer Method was born, while Internet forums went crazy with green-eyed monsters claiming to have invented the technique first. (Those people tend to call this technique ‘bokehrama’ or ‘panoramic stitching’ because agreeing on one name is apparently too difficult.) A Google image search of any of these terms will fill your screen with examples aplenty but this one by Ryan Brenizer himself seems to be the most common example. And damn right, it’s a stunner.

How the Brenizer Method Works

[caption id="attachment_1562" align="alignright" width="300"]bokehrama, expanding the frame 50mm f/1.4 Brenizer Method[/caption] Let’s say you’re out shooting but you only have a telephoto lens with you. Then someone says “Look at this amazing sunset! Please photograph me in front of it so I can impress my Facebook pals!” With a telephoto lens you’ll only be able take a head and shoulders portrait and miss the sunset entirely OR you’ll have to move so far away from your subject to fit everything in that they’ll barely be recognisable. The Brenizer Method lets you keep your subject close and intimate but still include as much of the scene as you want. [caption id="attachment_1561" align="alignright" width="300"]Brenizer Method wide angle lens comparison Same tree with wide angle lens - the subject would be further away[/caption] And because you’re using a wide aperture the background will be lovely and creamy and blurry so the background isn’t competing with your subject but is still adding interest and context to the scene. If you’d just used a wide angle lens your subject would be farther away than this technique allows (which is what you were thinking right?)

Why is the Brenizer Method so special?

Admittedly the Brenizer Method can be tricky to pull off successfully and I wouldn’t necessarily want to teach such an advanced technique early on. But in a pared down, form taking shots all around your scene to ‘expand the frame’ (where a wide aperture is optional) is a popular technique for conceptual artists and wedding photographers so I want to at least get you thinking about shooting extra shots around your scene. Here’s some of the reasons why:
  • If you’re shooting in a confined space and can’t move far enough away from your subject to fit them in, this technique allows you to shoot your subject and environment in a number of shots and stitch them together later.
  • By creating an image from more than one photo this increases the amount of pixels in your image giving you the ability to print at a much larger size without quality loss. Obviously, if you hope to make money selling prints this is a great advantage.
  • By taking two shots either side of your subject you can create the square shot that is so popular with conceptual photographers, rather than cropping out the top and bottom of your frame and losing pixels.
  • If you were photographing a wedding (for example) in a beautiful location, you want to show as much of it as possible without distancing yourself from your couple and losing them in the scene. (Although the opposite is currently popular in wedding photography where the photographer moves far away from the couple and photographs them as tiny dots in a large picturesque scene.)
  • Self-portraitists need their camera close for it to detect their remote so this technique allows them to add in the rest of the scene when they’ve finished shooting their pose.

Shooting the Brenizer Method

To attempt this technique you’ll want to use your longest telephoto with the widest aperture, usually preferencing the latter. I considered using my 70-200mm but figured the f/4 aperture wouldn’t be quite enough, plus I had a brand new 50mm 1.4 that I wanted to play with so I chose this lens instead. Next you’ll want to find your subject and location. My only available subject was myself which is another reason why I chose the 50mm because I needed to fit myself into one frame. Many photographers who use this technique shoot portraits or models and ask them to hold very still so they can shoot their upper and lower body in different shots, which isn’t so easy with a self-portrait. For my location I was out wandering the neighbourhood when I noticed that some vandal had been getting their kicks chainsawing trees in the local parklands. As I wandered along the felled trees got bigger and bigger until I found this mammoth tree that had been cut down and I came up with the concept of a girl trying to bring it back to life. I also liked that the tree offered a lot of foreground and background interest to add depth to the shot. Generally it’s best to avoid backgrounds with a lot of detail that will specifically need to line up, unless you’re like me and want to make it as hard on yourself as possible. Some points to keep in mind:
  • Avoid windy days or elements of your scene will move around
  • Ensure the light isn’t changing rapidly
  • Be mindful of shadows caused by your subject because you want the shadows to remain in all the accompanying shots. Keep your subject in place as you move your camera in this instance.
Obviously because I was shooting a self-portrait I had to use a tripod but it isn’t entirely necessary. However, it does help with lining your shots up later. Here’s how you set up your camera:
  1. Switch your camera to manual. You don’t want ANY of your camera settings changing while you do this process or your photos won’t match up afterwards.
  1. Set your exposure by using your widest aperture and change your shutter speed accordingly.
  1. Turn off auto white balance and either set a custom white balance or, if you’re lazy like me, use the daylight setting.
  1. Focus on your subject and then lock your focus by either switching your lens to manual focus or use back button focusing and don’t touch your focus button again. And most certainly do not change your focal length.
  1. If you’re shooting between 3-9 images it’s probably OK to shoot RAW. But if you’re (crazy) like me and wanting to attempt a 30+ image it’s advisable to shoot in JPEG or your computer won’t handle the processing when stitching the images together. (I shot in RAW and converted to JPEG afterwards.)
[caption id="attachment_1560" align="alignright" width="300"]expanding the frame, bokehpanorama Individual shots[/caption] When you’re ready take your main shot and then start taking your surrounding shots using a 40% overlap. It’s good to get into the practice of shooting in a pattern, ie in rows back and forth, but if you’re like me you’ll just shoot all around and hope for the best. Shoot slowly and be careful to ensure you have enough coverage. Another really helpful tip which I always forget to do is take a picture of your hand before the sequence and after the sequence to make it easier to identify in post. While you’re shooting your surrounding shots it’s best not to change the camera’s position but to swivel it up, across and down from one point as if it’s anchored to a tripod (if it’s not already). I made the terrible mistake of removing my camera from my tripod and stepping side to side then shooting above my head and down low. In my mind this made the most sense, like piecing together a puzzle. But in doing so my horizon line was changing which meant putting together my final image was a nightmare I intend never to repeat.

Post production for the Brenizer Method

There’s two methods for combining your images together in Photoshop. The first is to combine your shots manually which is fine for 3-9 shots but I certainly didn’t want to attempt it with over 40. The second method is to go to File -> Automate -> Photomerge. Select all your images and check the ‘blend images together’ box (this tries to match colour and exposure between shots). It may take some experimentation to choose the merging option that works best for you. For example, on my first go I tried the auto method and ended up with a terrible mess because I could see that Photoshop had expected me to swivel my camera rather than move it. I then decided to give reposition a go because essentially that’s how I shot it and got a much better result. [gallery link="file" columns="2" size="medium" ids="1566,1565,1567,1564"] Going against all previous advice I chose to try to stitch all my RAW files at once. “I’m patient!” I thought, “I’ll wait for this all day if I have to!” But it wasn’t the time it took to stitch that ended up being the issue. It was that on my first attempt Photoshop wouldn’t save a file that large and on my second attempt my computer ran out of scratch disc space. There’s no real working around these kinds of issues so I bit the bullet and converted all my RAWs to JPEG. It also forced me to get rid of any unnecessary shots that just weren’t needed because I’d been over-cautious and taken too many. To ease the load on my computer I also decided to stitch 4 images at a time so I ended up with about 7 resulting images that I then stitched together into one. [caption id="attachment_1568" align="alignright" width="150"]Layer mask button Layer mask button[/caption] When this process is done you’ll get an image with white lines throughout showing you the stitch points. Flattening the image removes the lines but you want to leave this until the very end. They are quite handy guides to show you where a stitch occurred so you can follow it along and check you’re happy with the results. If you’re not happy add a layer mask to the problem layer with the button at the bottom of your tools palette and either add more or remove some until the seams look realistic (more on this next lesson). You will likely come across areas where perspective shifts (areas that won’t line up) have occurred so you’ll need to select the problem spot and use the warp tool (Edit -> Transform -> Warp) to pull areas into place. By swivelling the camera side to side you may end up with gaps at the top and bottom of each seam. You can fill these areas in using the clone stamp or content aware fill or just crop them out. I worked on this shot for WEEKS to make the stitches look convincing, all because I hadn’t swivelled my camera and because I’d chosen such a difficult subject to stitch. I was also relatively new to Photoshop so everything took twice as long. If I can do it, so can you. This is a technique I use in almost all my conceptual photos, although I usually use 9 photos or less and avoid using such a wide aperture because it makes it too difficult to find accurate focus for self-portraits. If you are interested in trying this technique I’d also suggest starting small and don’t make the same stupid mistakes I did! Taking one for the team. :) Here's another example, photographed the same day: [gallery link="file" columns="2" size="medium" ids="1572,1573"] [caption id="attachment_1574" align="alignright" width="960"]Final image: The Road Less Travelled Final image: The Road Less Travelled[/caption]  

Many photographers use their camera to capture a moment; they see an interesting subject so they shoot it to the best of their ability. But a worthwhile experiment for every budding photographer is to try staging a photo. Rather than passively waiting for all the elements to perfectly arrange themselves, take control and create the moment yourself. It’s an important lesson in thinking about concept, setting, composition, lighting and posing. It could be as simple as approaching someone interesting on the street and non-creepily asking permission to pose them in a certain way or as elaborate as the over-the-top concepts often seen in fashion or advertising. Make, rather than take. Create. My chosen style of photography, conceptual fine art, uses photography to tell a story and so while the course of this blog will see me study and explore a photography technique each week, I also need to develop a story to incorporate that technique. It’s a daunting prospect because concepting a shoot requires thought, creativity and the drive to pull together the elements needed to bring a story to life. But tackling these challenges can only improve your work. If you break your project down into its different components it becomes easier to manage. ‘Garden Attack' is the very first conceptual photograph I ever took. I am proud of myself for attempting it even though I wouldn’t call it a success. But I thought it would make a good example to illustrate all the areas that need to be considered when creating a photo. Firstly, you need to devise a concept and that’s going to involve tapping into your stream of inspiration. Not a creative person? Rubbish. You either haven’t found a way to express your creativity or you’re not yet seeing the world as an endless source of inspiration. I can’t close my eyes and come up with ideas. I need to surround myself with books and art, music and movies, and the work of other photographers. I particularly love to browse op shops for props to build a story around.  I take these influences and use my own life experiences to give them a new twist. Buy a notebook and jot down every idea, no matter how stupid. Use Pinterest or Evernote to create an inspiration library that you can turn to at any time for a little creative boost. And if you’re really struggling, try some inspiration exercises. Brooke Shaden outlines some particularly good ones here.

“You don't make a photograph just with a camera. You bring to the act of photography all the pictures you have seen, the books you have read, the music you have heard, the people you have loved.”  - Ansel Adams
For ‘Garden Attack’ I came up with the idea purely because I liked the look of the passionfruit vines hanging over the fence and I thought about how a person might interact with them. Once you have your idea, break it down into all its components. Here, you’re thinking about:
  • Story
  • Setting – location, era, time of day
  • Subject
  • Props
  • Wardrobe
  • Pose
  • Lighting
  • Framing – angle, lens used
Story: this should primarily be guided by your idea, however if you’re simply shooting fashion or glamour it may not be especially relevant. For a conceptual photo, putting thought into your character will help get your story across clearly. Who are they? What is this situation they’re in and is it the most visually interesting part of their story? How did they get here? What happens after? Having answers to these questions will help you add extra elements that enrich the story. I wanted my character to look as if she’d been digging a hole in the garden but nature had started fighting back. It’s not a complicated story and had I put more thought into it I might have had a stronger image, but I do like that it’s open to interpretation. Setting: where and when is your story taking place? If your story takes place at a castle at sunrise then you’re either going to have to find a castle you can photograph at sunrise or recreate one using compositing. This is my biggest struggle. Either my concepts are too elaborate or the location I need is too public or dangerous. (With all the deadly creatures in Australia going off the beaten track is an extreme sport.) This means I have to think smaller, using the little pockets of trees and creeks that surround my home. My best tip is to assess your local area for its most unique features and include those in your photos. Use Google Maps to discover what’s nearby and then your car and your feet to explore further. Once I have built a portfolio I intend to approach more interesting locations for permission to shoot there. As my initial idea came from the vines over my fence, it was easy for me to shoot in my garden and tangle myself in the vines without travelling too far or having passers-by staring at me. Both the time period and time of day are not important here, but I did want to darken the photo to suggest that the weather, too, had been angered. Props: Having your subject interact with SOMETHING will make your shot more interesting and further your story. Being on an extreme budget I usually buy props from cheap “$2” shops, eBay or just use things I have lying around the house. Depending on your concept, you can even composite in a photo of the prop you want if it’s too difficult to get the physical version. For my shoot I needed some gardening implements. I had a rusty shovel lying around and I replanted an overgrown lettuce to look as if it was grabbing at my hand. I used the vines to wrap around myself and dug a hole in the ground to make it look like I’d been doing something in the garden. Wardrobe / Make up: What would your character likely be wearing? I have a clothes rack full of costumes specifically to be used in photoshoots. This is made up of clothes I don’t wear anymore, old costumes, and dresses from my *cough* goth days that are rich in dark colours and fabrics. I regularly scour eBay for vintage dresses (I never spend more than $30 unless it’s particularly special) and I visit every op shop I find. The clothes are cheap anyway but I like to go around change of season when I can usually pick up whole bags of clothes for $5 or less. For now, I wear basic make up I’ve applied myself. As my character was working in the garden I figured she’d be wearing something old and ragged. I had a pair of paint splattered overalls that I thought would work perfectly. To make myself look dirty I smeared some mud on my white shirt and arms but unfortunately I did this fairly half-heartedly so you can’t really tell. Subject: Who will play your character? What physical attributes do they need to have? If you have a willing family member or friend on hand – great! For me, mainly for ease of access, I primarily use myself but in the future I hope to either recruit friends or use models through ModelMayhem or online message boards. However, your subject needn’t be a person. An object or animal are perfectly fine too. I never considered using anyone but myself, however the story would have been stronger had I used a model and wrapped them entirely in vines. As it was I had to wrap myself up, take the photo (my camera was too far away to register my remote so I had to pull myself out of the vines to trigger it and quickly wrap myself back up), run back to the camera to check my pose and keep doing this over and over until I was happy with the photos I had. I waited a few hours to get the diffuse light I wanted and jumped outside when it was just right. It would have been tricky having a model waiting around for that to happen. [caption id="attachment_1506" align="alignleft" width="200"]Stupid remote Stupid remote[/caption]                   Pose: It takes a little experimentation to get this right but the best way to start out with posing is to think about what pose will help tell your story. Should it be powerful or submissive? I tried a number of poses for my concept, many of which didn’t work, including making it look as if my feet weren’t touching the ground and the vines had fully embraced me. My pose had to be tense and convey fear and struggle as I fought to escape the plants, but also partly submissive to make it look as if the vines were winning. [gallery columns="4" link="none" size="medium" ids="1500,1501,1502,1503"]   Lighting: Lighting is difficult and expensive, so it’s always best to start out with natural light, positioning your subject so it sculpts their features. Shoot early or late in the day and aim for overcast or cloudy days to avoid harsh shadows (unless that’s what you want). I’m just starting to dabble in the world of lighting, but you can start experimenting cheaply with lamps and candles. I photographed mid-morning but waited until clouds crossed the sun so that my skin had a milky tone and everything was nicely lit from the diffuse sun. Framing: Do you want a wide shot to see the location, or a tight shot to really focus on your subject? Do you want to shoot from low down to make them look powerful or high up to make them look submissive or straight on to let the image alone tell the story? I chose to shoot front on and in portrait orientation. I used a 50mm to get a close shot without distortion but I also moved my camera right and left to take extra shots of the garden to Photoshop in later (they didn’t make the final cut). Once you’ve thought all this through do a rough sketch of your idea to help you visualise all the shots you’ll need to take and any elements you might use to strengthen your story. [gallery size="medium" ids="1504,1505,1510"] If your shot doesn’t work out don’t feel dejected because you’ll have learned a tonne of things from the experience. It’s frustrating to fail but get straight back out there and shoot it again using what you’ve learned. This is the only way to improve. I initially considered my photo a flat-out failure because the “garden’s attack” was not how I envisioned and didn’t feel convincing enough. But I let it sit for a good 9 months before I took another look at it and with a little toning and colour correction in Photoshop I think it’s OK. I love jumping on the Flickr pages of great photographers and scrolling back to their first photos to see how far they’ve come. And I’d love to see yours too. Have you tried taking a staged shot? Show me your first attempt!

Over the coming weeks I will begin to explore the tricks and techniques used by the best photographers but rather than just saying “hey, here’s how to shoot an HDR image” I want to photograph these techniques in the style that I love to shoot. Every pro photographer specialises in a certain kind of photography and I want to talk about why it’s so important to define your niche and explain how I eventually stumbled across mine. When your passion for photography first ignites you’ll want to shoot everything in sight. Every flower, every sunset, every local event. You’ll find excuses to go places just so you can take your camera and begrudge going to events where cameras aren’t allowed. I was stuck in this snap happy wonderland for about three years before I started to consider making money from my hobby. But to be able to market yourself as a photographer you need to have a specialty. At first I thought this was ludicrous. Surely the fact that I can and do shoot everything makes me a better prospect for every photography job ever. But the more I thought about it the more I realised why this doesn’t make sense. If someone wants a children’s portrait, then they want to employ someone who shoots children’s portraits because that person will know exactly how to put children at ease in front of a camera. They don’t want someone who sometimes shoots kid’s portraits but also shoots food photography and sports because they’ll look at your website and won’t understand what they’re getting. (Unless you specifically shoot children eating food at sports games and then you have a specialty—even if it’s a creepy one). If, however, someone only shoots macro fungi then whenever a company is looking for a well-shot mushroom they’re going to save themselves time and employ the person who lives to shoot that subject and knows where the best mushrooms are and the best light to shoot them in, like THIS GUY, and not the guy who shot a mushroom once. And this is why it pays to specialise. Not just in photography, but in whatever your chosen profession is. It limits your competition and allows you to perfect your niche and be the best at what you do. I really struggled to define what it is I wanted to shoot. Whenever I tell someone I’m a photographer most people assume I shoot weddings and portraits because that’s what photography means to them and that’s traditionally where the dollars are. And for awhile I too pictured myself as a wedding photographer because it was the only field I knew I could make money from right away. But deep down I didn’t want to be a wedding photographer and I didn’t want to take family portraits. What I did like to shoot was landscapes and wildlife, but how do you make money out of those? Especially when there’s already so many people doing it better? Then one day on CreativeLIVE I saw an ad for a course on how to turn photographs into works of art and decided to tune in because the concept intrigued me. After watching Brooke Shaden’s class for a couple of hours I knew that THIS is what I wanted to do with every fibre of my being and I bought the course without hesitation in what became one of those life-defining moments. I would be a conceptual fine art portraitist. A WHAT? Well, normally when a portrait is taken it is commissioned by a person, family or company with the intent to showcase the subject’s beauty or professionalism. Conceptual fine art portraits on the other hand are created as an art form. Instead of smiling, candid subjects these portraits aim to tell imaginative stories through the use of costumes, props and posing. They are experimental in nature and in many circumstances utilise in-camera tricks or post processing to add an element of magic or the unreal, and it’s mainly these kinds of techniques I will explore throughout this blog. Conceptual fine art portraiture is a broad field so it’s incredibly hard to describe but as a picture paints a thousand words, here are some examples from a few of my favourite photographers. [caption id="" align="alignleft" width="238"]Away with the canaries 'Away with the canaries' by Miss Aniela[/caption] [caption id="" align="alignright" width="200"]to serve 'To serve' by Brooke Shaden[/caption] [caption id="" align="alignleft" width="253"]Set them free 'Set them free' by Erik Johansson[/caption] [caption id="" align="alignright" width="200"]These Are The Creatures In My Neighborhood 'These are the creatures in my neighbourhood' by Joel Robison[/caption]                           I was drawn to this field instinctually but over time I’ve asked myself why that might be. A few years back I would have told you I didn’t have a creative bone in my body but I’ve always loved the arts so have gravitated to jobs in this area. I can’t draw or play an instrument. I tried creative writing but it felt like drowning. I’ve since learnt that creativity is so much more than being able to dream up and make pretty things. It’s not a skill gifted at birth and it’s actually surprisingly easy to train yourself to be receptive to creativity when you find the medium that allows you to express it best. I now come up with at least three concepts for photos a day, whereas before, I was hard pressed to imagine ANYTHING. I’m also a perfectionist so being able to refine one concept is immensely appealing to me, whereas if I take a trip and shoot 3,000 photos, that’s an overwhelming amount of work for me and is the primary reason why most of my photos remain unseen. But most of all I’m a huge fan of magical realism, where elements of a magical world seep into our own and are presented in a way that makes it seem entirely normal. This idea is thrilling to me and conceptual fine art photography has given me the medium to express my fascination with this concept and a way to add magic to my everyday. So in defining your photography niche it pays to analyse your strengths and interests until you find a field that fits. If you’re really stuck this article succinctly wraps up some points that may help you define yours. But above all you need to love what you do because to succeed at something you need to pursue it doggedly and if your heart isn’t in it you’re destined to fail. Defining who you are is important because it gives your photographs intent, which makes them powerful. Good photographs have a clear subject, whatever it may be, and they tell a story about that subject. Sadly, choosing your field is not the end. Then the world expects you to have a personal style! Something about your work that is instantly recognisable and sets you apart from everyone else. Usually style comes naturally with experimentation. Mine is currently a work in progress but I know I like dark autumn colours, muted blacks, foreground interest, painterly techniques and cinematic lighting, and am sure these will manifest in my work, but for now this is still part of my journey. Discovering what you love to do is the fun part. Enjoy it! But if you’re a hobby photographer who loves taking photos for the sake of taking photos then that’s just fine too. Let me know how you discovered what you love to shoot!


How to replace a sky with Photoshop.

Compositing gives photographers the magical power to change the weather. Most people crave a sunny sky but for conceptual and landscape photographers the more colour and cloud in the sky the better. We go to so much effort to make a scene beautiful and interesting and are often let down by those bright, washed out […]


How to build a stock photo library for compositing.

I’ve been serious about photography for about five years now but even before that I always had a camera within reach. As a result I have over 80,000 photos in my Lightroom catalogue that I thought would never see the light of day, and the really exciting thing about compositing is that I can now […]


Introduction to compositing

The word compositing has a boring textbook definition that in a nutshell means “how the magic happens”. Compositing made it possible for Harry Potter to fly around a Quidditch pitch, for Spider-Man to swing between buildings, and for men to walk on the moon. (Just kidding.) (Or am I?) By combining elements from different pictures […]


How to create a double exposure photograph (portscape).

If I were forced to choose one photography technique to spend the rest of my life perfecting it would be the double exposure portrait. This involves taking one portrait and one scenery shot and smooshing the two together. The popularisation of this technique is attributed to Sara Byrne but for me it’s Antonio Mora who truly […]


How to improve photos with textures in Photoshop

This week I found myself in a rut when I realised all my photos were starting to look alike—the posing, the colouring, the framing—and while that’s all part of developing a style I got frustrated that after 12 weeks I’m not coming close to capturing the look I set out to achieve. I particularly struggle […]


How to lengthen a dress and hair in Photoshop.

  A few week’s ago armed with my camera, my mother (who was convinced I was going to get murdered) and a $20 piece of fabric I disappeared into a forest to try and build a dress. But we got there too early and the sun was all wrong and I had to shoot all […]


How to create a multiplicity image.

Whenever I’m travelling and have time to kill in my hotel room I like to try and take a conceptual photograph because … well, that’s what everyone does, right? Finding private locations to shoot conceptual photos in is one of the biggest difficulties of this type of photography so it’s always a bonus to have […]


How to shoot and edit the Brenizer Method (aka bokehrama, frame expansion, panorama).

The majority of people with a functioning camera will at some point have snapped a panoramic photo—a process that involves swivelling the body from side to side while taking a series of photos to capture the full range of a scene so beautiful it can’t be contained. (That last bit felt like it needed to […]


How to create a conceptual photograph.

Many photographers use their camera to capture a moment; they see an interesting subject so they shoot it to the best of their ability. But a worthwhile experiment for every budding photographer is to try staging a photo. Rather than passively waiting for all the elements to perfectly arrange themselves, take control and create the […]


What type of photographer are you? Discovering your style.

Over the coming weeks I will begin to explore the tricks and techniques used by the best photographers but rather than just saying “hey, here’s how to shoot an HDR image” I want to photograph these techniques in the style that I love to shoot. Every pro photographer specialises in a certain kind of photography […]